Removing the cover of your Doona car seat is an important part of regular maintenance, especially when dealing with spills, crumbs, or everyday messes. Whether you’re cleaning the fabric or replacing it, it’s essential to take the right steps to ensure the seat remains safe and functional. This guide will walk you through the process of safely and effectively removing the Doona car seat cover without damaging any of its components, so you can keep your baby’s ride clean and comfortable.
Can doona car seat be washed?
Yes, the Doona car seat can be washed, but not all parts are machine washable — it’s important to follow the care guidelines to keep it safe and in good condition.
✅ What You Can Wash on the Doona Car Seat:
| Part | Cleaning Method |
| Seat cover & infant insert | Machine wash (cold, delicate cycle); air dry only |
| Canopy fabric | Hand wash or spot clean with mild soap |
| Harness pads | Spot clean only |
| Harness straps | Wipe clean with a damp cloth (do not remove or soak) |
| Plastic/metal frame | Wipe with a soft, damp cloth |
⚠️ Important Reminders:
- Never use bleach, harsh chemicals, or a dryer.
- Do not remove the harness system—it must stay intact for safety.
- Always reassemble correctly before using again.
Here’s a simple step-by-step guide on how to remove the Doona car seat cover for cleaning or maintenance:
🧼 How to Remove Doona Car Seat Cover
✅ What You’ll Need:
- Flat surface to work on
- A bit of patience (it’s snug by design)
- Your Doona manual (optional but helpful)
📌 Steps to Remove the Cover:
- Detach the Shoulder Straps:
- Loosen the harness straps completely.
- Unbuckle the chest clip and crotch buckle.
- Pull the shoulder straps out of the slots in the seat.
- Remove the Infant Insert (if used):
- If your Doona has the newborn or head support insert, lift it out first.
- Remove the Fabric Cover:
- Carefully pull the edges of the seat cover away from the shell.
- Start at the sides and work your way around the top and bottom.
- Some parts may be tucked into the seat frame—gently pull them out.
- Check for Attachment Points:
- There may be small elastic loops or tabs hooked onto the seat.
Unhook these gently to fully release the fabric.
- There may be small elastic loops or tabs hooked onto the seat.
- Lift the Cover Off:
- Once all edges and fasteners are free, lift the cover off the seat shell.
🧼 Cleaning Note:
- The cover is machine washable (cold, delicate cycle) — air dry only.
- Do not bleach or iron.
🛑 Important:
- Always reinstall the cover correctly and securely before using the seat again.
- If unsure, refer to your Doona manual or Doona’s official website for visuals or videos.
Is doona car seat washable?
Yes, the Doona car seat is washable, but only certain parts are machine washable — others must be spot cleaned or wiped down.
🧼 Washable Parts of the Doona Car Seat:
| Component | How to Clean |
| Fabric seat cover | ✅ Machine wash (cold, delicate cycle); air dry only |
| Infant inserts | ✅ Machine wash (cold, delicate); air dry |
| Canopy fabric | 🧽 Spot clean or hand wash only |
| Harness pads | 🧽 Spot clean with mild soap and water |
| Harness straps | 🚫 Do not machine wash — wipe clean only |
| Plastic & metal parts | 🧼 Wipe with damp cloth and mild detergent |
⚠️ Do Not:
- Use bleach or strong chemicals
- Tumble dry any fabric parts
- Remove or machine wash the harness straps
When to remove car seat insert doona?
You should remove the car seat insert in your Doona when your baby no longer needs the added head and body support, which typically happens when:
✅ When to Remove the Doona Infant Insert:
- Baby’s weight exceeds 11 lbs (5 kg)
- Doona recommends removing the insert once your baby is over 11 pounds.
- Baby outgrows the insert
- If your baby’s head and body no longer comfortably fit within the insert or if it seems to push their head forward, it’s time to remove it.
- Straps don’t fit correctly with the insert
- If the harness seems too tight or misaligned while the insert is in, that’s a sign your baby may be ready without it.
🚼 Why the Insert Matters:
The infant insert provides extra support and proper positioning for newborns. Removing it too soon can affect the seat’s fit and safety; removing it too late can cause discomfort or improper harness placement.
👶 After Removing the Insert:
- Continue to use the head support until it’s also no longer needed (check the manual for guidance).
- Make sure the harness is at or below your baby’s shoulders and fits snugly.
Conclusion
Removing the Doona car seat cover is a straightforward process that helps you keep your baby’s seat clean, hygienic, and comfortable. By carefully detaching the harness straps, unhooking the fabric from the shell, and lifting it away without forcing any parts, you can safely remove the cover for cleaning. Always follow the care instructions provided by Doona to avoid damaging the fabric or compromising safety features. With proper handling, reattaching the cover is just as simple—keeping your Doona car seat ready for everyday use.